Jabra speak 410 User Manual Manuel d'utilisateur télécharger pdf (Page 4)

ENGLISH

JABRA SPEAK 410 USER MANUAL

INSTALLATION

Jabra PC Suite

Jabra PC Suite is a collection of software designed to support the Jabra SPEAK 410.

Download and install Jabra PC Suite from www.jabra.com/pcsuite.

CONNECTING

To connect the Jabra SPEAK 410, connect the USB cable attached to the speakerphone to any available USB port

on a PC or power-supplied hub. The Jabra LED will light up white to indicate the speakerphone is connected and

powered on.

Note: The speakerphone must be connected to a PC USB port or power-supplied hub, and not a bus-powered

USB port (such as a keyboard with an integrated USB).

SETUP

When the Jabra SPEAK 410 is connected to a PC, Windows will automatically congure the speakerphone as the

default audio device.

To manually change the default audio device in Windows:

1. Click on Windows Start and then launch Windows Control Panel.

2. Open Sound and Audio Devices, and select the Audio tab

3. Under Sound Playback, and Sound Recording, set the preferred audio device as the default device. Click apply

to save the settings.

CALL FUNCTIONS

Basic functions

Event Action

Make a call Dial the phone number using the PC (softphone)

Answer an incoming call

Tap the green handset button

End a current call, or reject an incoming call

Tap the red handset button

Mute/un-mute the Microphone

Tap the mute button to toggle between mute/un-mute. When muted, all LEDs will light up red. When the

speakerphone is ringing, or when a call is ended, the microphone will always be un-muted.

Increase/decrease Speaker Volume

Tap (or press and hold) the + / – buttons.

The speakerphone volume has a twelve-step scale, indicated by twelve white LEDs arranged in a circle on the

speakerphone.

1 2 3 4 5 6

Pas de commentaire

Jabra speak 410 User Manual Manuel d'utilisateur Page 4